Is The CNC Steel Cage Forming Workstation Practical? Why Force Configuration?

Aug 30, 2025

Leave a message

The CNC steel cage forming workstation is a complete set of equipment that integrates the traditional scattered processes of "material preparation - threading - winding - welding - transportation" into a fully automatic and continuous production line. It is specially designed for the factory production of steel cages for bored cast-in-place piles in Bridges, high-speed railways, building construction, nuclear power and other industries. The following will thoroughly explain it to you from four aspects: structure, working principle, technical features, and application fields.

 

Working principle

 

1. Threading and positioning

Manually or mechanically, the straight main ribs that have been threaded are inserted into the fixed disk → the moving disk corresponds to the conduit and clamped. The coil material is hoisted onto the wire laying frame, straightened and then pulled to the starting welding point.

 

2. Parameter setting

Input data such as the cage diameter, the number of main ribs, the spacing of stirrups, and the welding speed on the touch screen. The PLC automatically generates the walking speed of the moving disc, the rotational speed, and the action rhythm of the welding torch.

 

3. Synchronous winding and welding

The two discs rotate synchronously. The moving disc moves backward according to the set pitch, and the stirrups are spirally wound around the outside of the main bars. The six-axis mechanical hand with two welding guns welds the intersection points in real time to form a continuous steel cage.

 

4. Finished product lifting and transportation

After the welding is completed, the automatic cage support device lifts the entire section of the steel cage and transfers it to the finished product area through electric rollers or lifting gear. If an extension is needed, the next section can be directly joined at the tail end of the roll welding machine.

 

Technical advantage

 

1. Fast speed: The welding cycle time for each main rod is less than 35 seconds.

 

2. Stable quality: Mechanized operation is not affected by human factors. Even after long-term operation, the quality remains stable.

 

3. In terms of quantity, form, model, size and length, it all complies with the design requirements of various main stirrups, and will not affect the design of the steel cage and the decentralized mobile operation at the construction site due to the function of the equipment.

 

4. Simple operation: The modular design makes transportation, installation and production processes convenient, suitable for large-scale fixed production in factories and decentralized mobile operations on construction sites.

 

5. Achieve fully automatic welding of steel cages to enhance work efficiency, reduce manual labor intensity, and improve the welding quality of steel cages.

 

Typical application fields


1. High speed rail, intercity railway, and expressway


2. Municipal housing construction: subway, urban elevated, super high-rise pile foundation;


3. Water conservancy, hydropower, nuclear power, etc

 

A one-sentence summary:The CNC steel cage forming workstation is a combination of "CNC + robot + assembly line". It has transformed the original steel cage production process, which required dozens of people, occupied a large area and had low efficiency, into a "factory-style" production with only two people on duty, occupying a single line. It is a key equipment for modern pile foundation engineering to move towards industrialization and digitalization!

 

news-350-350
 
news-350-350
 

 

 

Send Inquiry
Send Inquiry