Xuhui (Shandong) Intelligent Equipment Co., Ltd. is one of the leading manufacturers and suppliers of cnc steel bar precision bending machine in China. If you're going to wholesale high quality cnc steel bar precision bending machine made in China, welcome to get quotation from our factory. Customized orders are welcome.
The CNC steel bar bending and hooping machine is an integrated piece of equipment for straightening, sizing, bending, and cutting steel bars, primarily used in steel bar processing. The machine is simple to operate, labor-saving, supports speed adjustment, and can be operated by a single person throughout the entire process. Whether on a construction site or in a large steel processing plant, it is your reliable assistant.
Products Description
● The equipment can handle both standard and large-size requirements, continuously produce products in various specifications, and process steel bars with a maximum diameter of 16 mm, easily meeting different steel bar processing requirements. Whether for diverse stirrup demands or batch production in large-scale steel bar processing plants, all tasks can be completed with results far superior to those of traditional mechanical equipment.
● Accuracy is maintained within ±1 mm, with virtually no dimensional error in the finished product. This fully meets the standards for steel bar processing in construction projects, improves quality and efficiency, and reduces waste caused by rework.
● Accuracy is maintained within ±1 mm, with virtually no dimensional error in the finished product. This fully meets the standards for steel bar processing in construction projects, improves quality and efficiency, and reduces waste caused by rework.
● This device supports processing patterns with up to 60 bends. It can store tens of thousands of product shapes, so there is no need to repeatedly set parameters during subsequent processing. The stored parameters can be used directly, which speeds up production and meets customized requirements for different construction scenarios.
● The entire process, including parameter settings, graphic editing, and device startup and shutdown, is completed via a touchscreen. The interface is simple and intuitive, allowing ordinary workers to operate the equipment quickly after brief training and helping enterprises rapidly form production teams.
Product Specifications
| Model | XHWG-12 | XHWG-14 |
| Scope of steel bar processing | 6-12mm | 6-14mm |
| The processing diameter of double reinforcing bars | 5-10mm wire rods | 5-10mm wire rods |
| The range of stirrup edge lengths | 60-1200mm | 60-1200mm |
| Bending Angle | 0-180 ° | 0-180 ° |
| Maximum traction speed and feeding speed | 80-110m/min | 80-110m/min |
| Maximum bending speed | 1100°/sec | 1100°/sec |
| Length accuracy | ±1mm | ±1mm |
| Angular accuracy | Plus or minus 1 ° | Plus or minus 1 ° |
| The number of surfaces used by the cutter | Four sides | Four sides |
|
Maximum production capacity of a single line (standard stirrups) |
2,000 pieces per hour | 2,000 pieces per hour |
|
Maximum production capacity of dual lines (standard stirrups) |
3,500 per hour | 3,500 per hour |
| Total power | 28KW | 35.5 KW |
| Traction motor | 20.5 KW | 20.5 KW |
| Cut off the motor | 4.0 KW | 4.0 KW |
| Bending motor | 7.5 KW | 7.5 KW |
| Pneumatic pressure | 0.6 Mpa | 0.6 Mpa |
| Output (average | 10 tons per 10 hours | 10 tons per 10 hours |
| Total weight of the machine | 1800KG | 3000KG |
| Overall dimensions | 3.69 * 1.2 * 2.2 M | 3.69 * 1.2 * 2.2 M |
Product Images and Finished Products
Product Comparison Advantages
Motor:
Equipped with a branded synchronous servo motor, providing higher precision and a service life of up to 5 years. Other manufacturers typically use ordinary asynchronous servo motors, which have larger errors and a service life of only about 3 years.
Traction mechanism:
Equipped with a 20.5 kW traction motor and a 7.5 kW bending motor, featuring a higher speed ratio and stronger processing force. In comparison, traction motors used by other manufacturers are mostly rated at 15.5 kW or 18.5 kW, resulting in weaker performance.
Processing capability:
Supports bidirectional 360° bending and dual-line processing. Other manufacturers generally support only 320° bending and single-line processing.
Console:
Features a suspended console design for convenient operation. Most other manufacturers use separate consoles with a longer operating distance, making operation less convenient.
Key Points of Daily Maintenance
- Before starting up, check that all connections are secure, and regularly use a wrench to tighten screws to prevent loosening that could cause equipment vibration or parts to fall off.
- Regularly apply lubricating oil to components that require lubrication, such as bearings and gears, to reduce wear and extend the service life of the machine.
- When replacing cutting tools or performing maintenance, be sure to turn off the power supply and place maintenance warning signs to ensure a safer operating environment.
- Promptly remove steel bar debris, oil stains, and other contaminants from the equipment surface to prevent them from entering the transmission system.
- Before leaving the machine, always turn off the power supply and switches to prevent accidental startup that could cause personal injury or equipment damage.
