When purchasing a CNC wire mesh welding production line, do not start by looking at the price. Instead, lock in the following 5 key parameters first, so that you can match the machine model and avoid the situation where the equipment cannot be put into production after delivery.1. Wire Diameter: The range of diameter of steel bars / steel wires that the machine can weld. This is the basis for the power of the welding machine and the configuration of the welding head. If the wire diameter is too large, a larger welding current is required, and ordinary models cannot meet this requirement.
2. Mesh Pattern: The spacing between the warp and weft wires. This directly corresponds to the standard of the finished product. Most models have adjustable mesh patterns, but the adjustable range has an upper limit. Confirm the grid size specified in the project in advance.
3. Maximum Mesh Width: The maximum width that the equipment can produce the mesh sheet. This determines the specification of each sheet of mesh and is also an important indicator for the production line's floor space and the net pulling mechanism.
4. Output: Calculate based on the number of welds per minute or the daily production capacity. Match the order volume and distinguish between regular models and high-speed models to avoid insufficient production capacity causing delivery delays.
5. Raw Material Form: Confirm whether it is wire in coils or straight bars for feeding. The two feeding structures are different and cannot be used interchangeably. This is a point that is easily overlooked in the selection process.
