Xuhui (Shandong) Intelligent Equipment Co., Ltd. is one of the leading manufacturers and suppliers of cnc steel mesh automatic welding machine in China. If you're going to wholesale high quality cnc steel mesh automatic welding machine made in China, welcome to get quotation from our factory. Customized orders are welcome.
CNC steel mesh automatic welding machine-sometimes called a panel welder-is basically a machine for automatically welding steel mesh or fencing panels in batches. It works mostly using resistance welding: the electrodes press the metal pieces together and pass current through them, creating enough heat at the contact points to melt and fuse the metal, finishing the weld.
- Day-to-day use is pretty simple. You just set the mesh size on the PLC or computer-anywhere from 50 to 300 mm, adjust it however you want. Welding settings can be done at the same time.
- If you add a vision system, it'll check the welds and spacing on its own. If something's off, it flags it right away and saves the data. Saves you from standing there watching it all the time, and helps cut down on bad pieces.
- Material-wise, it's pretty flexible. Round bars, deformed bars, stainless steel wire-usually in the 3 to 16 mm range-it can handle all of that. It's not limited to standard mesh either; diamond or wave shapes are doable too. Size can be adjusted depending on what you need, so it works across different jobs.
This machine's got a bunch of practical little touches that make it easy to use and save money.
It's got special molds for both the long and cross directions. Swapping a set takes like 10 minutes-no big disassembly needed. The molds are pretty universal too, so common spacings like 50, 100, or 150 mm are easy to switch between.
Changing the welding wire is super simple compared to older machines, so maintenance is way faster. You can use different thicknesses of wire, no need to stick to just one. It even recycles some energy while welding, so it uses less electricity than the old hydraulic setups.
No hydraulics-so no oil leaks and the shop stays cleaner. It's also quiet, under 65 dB, which is pretty good for a big metal machine.
The whole line feeds material automatically. Coils or straight bars go in smoothly, and there's tension control, so nothing tangles or bends out of shape. Basically, you don't need someone standing there babysitting it the whole time.
This machine makes steel mesh that's mostly used in all kinds of cast-in-place and precast concrete projects-like building floors, walls, and bridges. Using it for reinforcement makes the whole structure stronger, and the steel quality is consistent and reliable, so you don't have to worry.
In precast production, it helps you batch-produce parts that all look the same, with neat edges and consistent quality and precision.
The steel mesh from this machine is also widely used in infrastructure projects-like highway central dividers or bridge flood-protection fences-providing sturdy barriers and keeping construction safe and secure.
