Xuhui (Shandong) Intelligent Equipment Co., Ltd. is one of the leading manufacturers and suppliers of reinforcement mesh welding system in China. If you're going to wholesale high quality reinforcement mesh welding system made in China, welcome to get quotation from our factory. Customized orders are welcome.
Reinforcement mesh welding system
You'll see it used in construction, bridges, shipbuilding, and similar jobs. It works by using methods like resistance welding, laser welding, or arc welding-heating the steel to the point where it fuses together. The result is a strong, solid joint, and the process is both fast and accurate.
Main components
Wire feeding: It uses feed rollers with a servo motor, so the speed can be adjusted and stays fairly steady. Different wire sizes and materials can be handled without much trouble, and feeding is generally smooth-jamming isn't a common issue.
Straightening: There are multiple sets of straightening rollers, combined with CNC control. Even if the wire comes in a bit bent, it can be straightened out quickly. The result is fairly even, which makes the next steps easier.
Welding: It uses resistance welding, with multiple points welded at the same time, so efficiency is decent. Parameters like current and welding time can be adjusted, and the welds come out fairly solid and consistent.
Cutting: The cutting unit is servo-controlled. After welding, the mesh is cut to the set size directly. The edges are usually clean, so there's no need for extra finishing in most cases.
Technical parameters (Note: Customization is acceptable)
|
Product details |
Parameter description |
|
Welding width |
1500mm |
|
Welding length |
2000mm |
|
Reinforcement spacing |
≥100mm |
|
Steel bar diameter |
5-8mm |
|
Maximum welding capacity |
8mm+8mm |
|
Maximum number of welding points |
Eight |
|
Warp feeding method |
Coiled steel bars |
|
Weft feeding method |
Automatic filament falling |
|
Control mode |
PLC Programming |
|
Welding speed (row/minute) |
25-45 rows per minute |
|
Upper electrode |
Φ 25mm |
|
Number of welds |
One-time pressing, separate control welding |
|
Rated frequency (HZ) |
50 |
|
Power supply pressure (V) |
380V |
Less consumption, cleaner to run
Cleaner operation - the welding process doesn't create much smoke or dust, so the space stays fairly clear. It also doesn't rely on diesel or gasoline, so there's no exhaust to deal with. Overall, less mess and less cleanup.
Longer-lasting, less waste - the machine is built with solid materials, so it holds up over time. You don't need to waste a lot of material on repeated adjustments, and there's not much waste like wastewater or scrap from trial runs. Maintenance is pretty straightforward too, and some issues can be handled remotely, so it saves time and effort.
