The numerical control steel bar bending center enables simultaneous bending of multiple bars of the same specification at the same workstation, which is a key configuration for large-scale steel bar processing plants and bridge prefabrication sites to increase production capacity. Unlike traditional single-bar bending equipment, it significantly shortens the processing cycle of batch steel components.
The number of steel bars that can be bent simultaneously depends on the diameter, material grade, rigidity of the equipment frame, and servo power of the machine. For fine-grained threaded steel bars, multiple can be bent at once, while for thick steel bars, the number is reduced to ensure stable forming angles and controllable rebound. The entire equipment relies on a synchronous clamping positioning mechanism to ensure that the bending angle and size error of each steel bar remain consistent. The consistency of the finished products is much higher than that of manual batch processing, reducing the cost of on-site quality inspection and rework.
In the multi-bar simultaneous bending mode, only one material feeding and one program call are required. There is no need to repeatedly change materials and debug. The output per shift is significantly increased, while the number of operators is reduced, alleviating the shortage of workers and high labor costs on overseas construction sites. The equipment supports storing multiple steel bar shape drawings. Stirrups, main steel bars of beams, and special tension bars can all be batch-produced, suitable for infrastructure projects such as highways, bridges, tunnels, and pipe piles.
When purchasing a numerical control bending center, it is necessary to carefully verify the continuous stability of multiple threaded steel bars being bent simultaneously to avoid some models falsely indicating the bending quantity. After long-term full-load operation, problems such as size drift and rapid wear of molds may occur. Combined with steel bar cutting, transportation, and steel cage welding workstations to form a fully automated production line, it realizes centralized processing of steel bars, which is very suitable for factory-scale prefabrication projects.
On-site photos
