Xuhui (Shandong) Intelligent Equipment Co., Ltd. is one of the leading manufacturers and suppliers of hydraulic sheet metal shearing machine in China. If you're going to wholesale high quality hydraulic sheet metal shearing machine made in China, welcome to get quotation from our factory. Customized orders are welcome.
In the metal processing stage of industrial production, hydraulic sheet metal shears, with their outstanding performance, have become the ideal choice for many enterprises. It can precisely cut various metal plates and also demonstrates significant advantages in terms of efficiency, stability and safety.
The hydraulic sheet metal shearing machine, with its product advantages of high efficiency and accuracy, stability and reliability, safety and convenience, as well as its product selling points of intelligent adaptation, durability and economy, and rich functions, plays an irreplaceable role in modern industrial production. It not only enhances the production efficiency and product quality of metal processing, but also reduces the production costs and safety risks of enterprises, providing strong support for the development of numerous industries such as mechanical manufacturing, construction, automobiles, power, petrochemicals, etc.
Basic Structure of the Machine Tool
The Frame: The Steel Backbone
This is the main body of the machine! You see these steel-plate-welded left/right columns, worktable, and oil tank? It looks solid and sturdy, but here's the designer's trick: they used welding instead of cast iron, making it 20% lighter yet it can handle a 5-ton impact. The two oil cylinders are fixed right onto the support plates connecting the columns and the outer pressing plate.
The Upper Blade Holder: A Welded Triangular Frame
You know those triangular scaffolds on construction sites? This blade holder uses the same tough design! The guide plates are like its skateboard, with the blade and back gauge sitting on top. Two oil cylinders, along with an accumulator, move back and forth to cut the steel sheet. The coolest part? Our Hydraulic Sheet Metal Shearing Machine auto-levels when moving – super steady!
Left & Right Oil Cylinder Units: The Muscles Hidden Inside
These two oil cylinders are like twins, each made of a piston and seals. I once saw them shearing a 16mm thick steel plate – the piston rods looked like bulging veins (at 16MPa oil pressure), powerfully pushing the upper blade holder. Between you and me, these two save us a pretty penny on electricity every year.
The Hydraulic System: The Machine's Coffee Run
This is the power unit, made up of the main motor, gear pump, valve group, oil tank, and pipes. Think of it this way: the main motor is the coffee maker, the gear pump is the straw, and the oil tank is a giant 50L iced coffee jug. Last time there was a leak, the repair guy groaned, "These pipes are a bigger mess than your internet cables!" But honestly, it's smart – our machine auto-alarms if the oil temp hits over 50°C. Pretty thoughtful, right?
The Material Holding Device: The Steel Sheet's Massage Chair
This consists of several pressing cylinders on the front outer plate. These small cylinders at the front are like massage nodes. When they press down, you hear a solid "thump" – the hydraulic pressure overpowers the spring tension, and the press head clamps the sheet firmly. The smart part? The thicker the sheet, the tighter it grips (pressure auto-adjusts). Once the cut's done, it pops right back up.
Blade Gap Adjustment: The Fine Art of the Scissor's Edge
This includes the adjustment handwheel, lead screw, dial, etc. Turning the handwheel feels like tuning an old-school radio knob – the lead screw turns the dial round and round. Remember this rule of thumb: keep the gap between 5% to 8% of the sheet thickness. For example, for a 10mm sheet, the gap should be 0.5-0.8mm. Too wide, and you'll chip the blade; too tight, and it'll jam.
The Electrical System: The Machine's Smart Brain
This includes the CNC electrical cabinet and button box on the right column, handling the machine's operation and control. Once, a newbie hit the wrong button, and the blade holder nearly shot to the ceiling – turns out the program has a "fool-proof lock" that just stops working if you enter the wrong thickness. Plus, our Xu Hui Hydraulic Sheet Metal Shearing Machine even tracks blade life and keeps flashing a reminder on the screen when it's time for a change.
Technical Specifications
| No. | Parameter | Specification |
| 1 | Max Cutting Thickness | 20 mm |
| 2 | Max Cutting Width | 2500 mm |
| 3 | Material Strength | 450 N/mm² |
| 4 | Cutting Angle | 0.5° - 2.5° |
| 5 | Max. Rear Gauge Distance | 800 mm |
| 6 | Cutting Strokes | 7 - 10 min⁻¹ |
| 7 | Column Spacing | 2600 mm |
| 8 | Blade Length | 2600 mm |
| 9 | Workbench Height | 800 mm |
| 10 | Main Motor | Power: 30 kW Speed: 1500 rpm |
| 11 | Rear Gauge Motor | Model: Y2-90L-8 Power: 0.55 kW Speed: 700 rpm |
| 12 | Hydraulic Pump | Model: 63 Flow Rate: 63 L/min Pressure: 32 MPa |
-
Don't let the cold, hard appearance fool you – every part has an engineer's thoughtful touch. It's built to handle tons of pressure while saving on costs and electricity. It needs to be fast as lightning yet accurate as a sniper. Oh, and a friendly tip: better not mess with the blade gap settings; you're better off leaving them as they are.
If you would like to learn more, please contact us using the information on the right or below. We look forward to your visit and hope to become your trusted partner.
