Xuhui (Shandong) Intelligent Equipment Co., Ltd. is one of the leading manufacturers and suppliers of hydraulic shearing workstation in China. If you're going to wholesale high quality hydraulic shearing workstation made in China, welcome to get quotation from our factory. Customized orders are welcome.
This hydraulic shearing machine has been pretty easy for us to use, so I'll just share how it feels in real work.
Since it's hydraulic, the force is strong and steady. The speed is also quite good, around 20 to 30 cuts per minute, which is definitely faster than the mechanical shear we used before. When we're doing batch jobs, the efficiency difference is pretty obvious.
Another thing we've noticed is how reliable it is. We can run it all day without issues, and the hydraulic system stays stable-no power drop or jamming. We don't have to keep worrying about the machine stopping halfway, so it makes the workflow a lot smoother.
Accuracy has been solid too. We can adjust the blade gap depending on the material and thickness, and once it's set, the cuts come out clean and even. The tolerance stays within about ±0.5 mm, so we usually don't need any extra grinding or fixing. The linear guides and ball screw keep everything aligned, so there's no shaking or uneven cuts. After cutting, we can move straight to welding or bending without rework.
The machine we use every day is actually pretty well set up. Nothing fancy, just practical and does what we need.
- On the hydraulic side, we're using either an axial piston pump or a vane pump. The flow stays steady, pressure is strong enough, and it runs efficiently. The pressure is usually around 20 to 31.5 MPa, and it just works across different setups without needing much adjustment.
- The cylinders are made from solid alloy steel, so they hold up well and don't wear out easily. Sealing is good too, so no leaks or loss of power. When it comes to cutting, the force is there-you don't really have to worry about it struggling. The valves handle pressure and direction pretty smoothly, so the whole system just runs steady without acting up.
- On the mechanical side, the frame is built from thick steel plates, welded together and then treated to relieve stress. So even after long use, it doesn't really deform, and accuracy stays pretty stable.
- The tool holder is tough and wear-resistant, and with linear guides and a ball screw, movement feels smooth and controlled. When it returns, it uses nitrogen or springs, so it doesn't need extra effort-it just resets and keeps going.
- The blades are also solid-made from alloy steel, heat-treated so they're both hard and tough. They stay sharp for a long time, and even when they wear down, you can just grind them and reuse them. Changing blades or adjusting the gap is pretty straightforward too, nothing complicated.
- Overall, it's one of those machines you don't have to think about too much-it just keeps working.
