Xuhui (Shandong) Intelligent Equipment Co., Ltd. is one of the leading manufacturers and suppliers of high efficiency conduit production line in China. If you're going to wholesale high quality high efficiency conduit production line made in China, welcome to get quotation from our factory. Customized orders are welcome.
Products Description
Small-diameter duct production lines are primarily used in tunnel and subway engineering. This production line helps you automate the production of small-diameter ducts.
It can complete cutting, welding, and other processing steps on a single production line. Workers only need to set the parameters, and the machine runs automatically. This not only saves manpower but also ensures more consistent duct dimensions and quality.
For engineering projects, this leads to faster production speeds, reduced material waste, stable quality, and higher project efficiency.
Product parameters
|
Overall parameters of the small catheter production line |
||
|
|
XHDG -50 |
XHDG -108 |
|
Loading and unloading method |
automatic |
automatic |
|
Pipe type |
Seamless steel pipe |
Seamless steel pipe |
|
Pipe wall thickness |
≤8mm(Plasma power supply determination) |
≤10mm(Plasma power supply determination) |
|
Pipe length |
≤5/≤9m |
≤6/≤12m |
|
Tapering range |
φ42-φ50 |
φ42-φ108 |
|
Cutting hole diameter |
3.5-5mm |
6-10mm |
|
Processing efficiency |
50-79 seconds / piece |
50-60 seconds / piece |
|
Total installed power |
50kw |
198.5kw |
|
Rated voltage |
380V |
380V |
|
Total weight |
5T |
8.5T |
|
External dimensions |
13000*4500*1650mm |
14000*6500*2000mm |
|
Cutting hole assembly |
||
|
|
XHDG -50 |
XHDG -108 |
|
Feeding accuracy |
±0.2mm |
±0.2mm |
|
Feeding frequency |
15 times /minute |
15 times /minute |
|
Installed power |
3kw |
60kw |
Product image
Product Features
- High efficiency – A continuous production line runs several times faster than manual labor.
- Stable quality – Each small guide tube is the same size, and the welds are strong and reliable.
- Easy operation – Even beginners can work directly; simply adjust the parameters for automatic processing.
- Wide range of applications – Suitable for tunnels, subways, and underground engineering projects.
Precautions
Before starting the machine, check the equipment: Ensure the power supply, air supply, and hydraulic system are functioning properly, and check for any loose parts. Do not start the machine if there are any problems.
Raw materials must be qualified: Steel pipes must meet specifications. Pipes that are too thin or too bent will affect the quality of the finished product and may damage the equipment.
Parameter settings must be accurate: Cutting length, punching spacing, and welding parameters must be properly adjusted. Do not change them arbitrarily, otherwise, inaccurate dimensions or weak welds may occur.
